Ring Stick Up Camera is no doubt one of the vital important home gadgets everybody needs to have in a mordern house, if you know your security is very important.
Also know that Ring stick Up camera’s come with quite impressive upgrades as compared to the previous generation however, one thing you might still not be satisfied with is its lack of free cloud storage.
Now that alone wouldn’t make Ring security camera a wash away product since it comes with all the basic features you would normally expect from a security camera.
However, the ring stick-up security camera is prone to some issues which makes resetting it inevitable.
Also now, some of these issues require a certain troubleshooting step, and for others, you just have to carry out a factory reset.
Since, you’re here to figure out how to reset ring stick up camera, below I will be breaking down how to do that
Of course but before we delve into that let’s briefly touch on the issues that usually require a reset and the troubleshooting steps you ought to try before carrying out a factory reset.
Reason you need to Reset Ring Stick Up Camera?
Below are some of the reasons why you need to reset your ring stick up camera to default or factory settings.
Stick Up Camera Suddenly stop working
Now, here is how it usually goes, maybe you’ve been using your Ring Stick up camera for a while, and while using it, everything works fine, but suddenly, it starts malfunctioning, and maybe the live view, Wifi signal, or motion detection isn’t working anymore, Then, in this case, you should carry out a factory reset.
Ring Stick Up Cam Not Charging
Now, if you are facing issues similar to these: your batteries are not charging after inserting them into the camera, or it’s indicating Low battery after charging it, or maybe you feel the camera isn’t charging the battery, in scenarios like these, the first thing you should do is check if the battery is still okay and it hasn’t exceeded its battery life. If the battery isn’t the issue, then carrying out a factory reset is your best bet to resolving it.
Camera Will Not Turn On
Have a spotlight battery cam, charged the battery multiple times *green light comes on*, I then insert to set up and it says low battery (2%)…tried reinstalling the app, removing cam and setting up new device…same response, will not let me connect to wifi, tried both battery slots also…have a ring doorbell that works fine on wifi (got both together and both had been fine)…I did let them both die (batteries), but have done before also …any ideas?
Problem Entering set up mode
Most users have complained about connecting their ring stick-up camera with the POE switch, But they have issues setting it up. Probably you have been able to connect a POE switch to a Ring Stick-Up camera but you are not able to connect it with another ring camera. If you are faced with these issues, Reset your Ring stick-up camera.
Moving, on what you should watch out for before you carry out a reset is simply by looking out for a sort of malfunctioning, Maybe the battery is supposed to be charging and it isn’t charging or maybe the wifi isn’t connecting but the router is working perfectly, if you are faced with any other scenarios like this and you have verified the possible source of the issues but the problem persists, then you should carry out a factory reset.
Below are the Procedures to carrying to reset your ring stick up camera.
How to Reset Ring Stick Up Camera (1st Generation)
If you are using a 1st generation Ring Stick Up camera, follow these steps closely to reset it.
1. Lift the camera Back Cover
There is a cover at the back of the camera, over there you will be able to locate the orange setup button, that will be used to reset it
2. Long press the Orange Button for 20 seconds
After lifting the cover at the back of the camera, you should see an orange setup button right there, simply Press and hold down the orange button for at least 20 seconds before releasing it
After doing this, the front light on the camera will flash for a few minutes. Once the light turns off the reset has been completed.
How to Reset Ring Stick Up Camera (2nd Generation)
If you are trying to figure out how to reset ring stick up camera follow the steps below.
1. Remove the Battery Cover
Simply, locate the battery cover, and remove it. after doing that you should see an orange button near the battery slot.
2. Long press the Orange Button for 10 seconds
Since you’ve lifted the cover and you can see the orange button close to the battery slot, press and hold it down for 10 seconds before releasing it.
Once, you’re done with that the light at the front of the camera will flash for a few minutes. Immediately the light turns off, the reset has been successful
Resetting Ring Stick Up Camera Battery (3rd Generation)
If you are using the latest generation of ring stick up Ring security camera which is the Ring stick up camera, follow these steps below to reset your
1. Make sure the battery is charged
If you have a battery-powered ring stick Up camera, one thing you want to watch out for is that the battery is well charged before you perform rest, and here’s how to do that
2. Then Remove the battery cover
Once the battery is charged remove the battery cover so that you will be able to access the orange setup button
Now, press and hold down the orange button for 10 seconds and then release your hands
When the camera completely resets, you will enter the setup mode.
Resetting Ring Stick Up Camera Wired (3rd Generation)
Looking for how to reset ring stick up camera (Wired) 3rd Generation? if yes, follow the steps below
1. Connect your Ring stick Up to a Power Outlet
Over here you need to ensure that the camera is connected to a power outlet, to effectively carry out the reset procedure.
At the back of the device, you will see an orange setup button, press and hold it down for 10 seconds and then release it.
So when the reset is done, your camera will enter setup mode.
Ways to Reset ring floodlight Cam Pro
During the process of resetting the ring floodlight security camera is quite similar to the rink stick up to reset it simply do these:
- Ensure it is charged or connected to a power supply
- Press and hold down the orange setup button for 10 seconds too. In a scenario
- Once, your camera enters a setup mod the resets have been successful.
Since you’ve been exposed to how to reset Ring stick up camera, below are commonly asked questions regarding the topic.
Ring camera stuck in setup mode
If you are faced with a scenario where the setup process keeps going in a loop such that before you finish the setup process, it goes back again, prompting you to restart the setup process again, simply carry out a reset.
Ring camera setup mode
Your ring camera enters a setup mode once the light on the bottom begins to flash.
Ring stick up cam elite factory reset
if you have a Ring stick Up Camera Elite Here’s how you should reset it.
- Locate the setup button. The setup button is located under the cover at the back for ring stick up Elite camera,
- Long press the Setup button for 10 seconds
- As soon as the reset is complete the Ring stick up Elite camera will enter setup mode
When Resetting ring Camera Wifi
Maybe you want to reconnect your Ring camera to new wifi or an old one here’s how you can go about it
- First of all launch the Ring app
- Tap on the menu icon. It looks like a Hamburg icon, situated at the top left corner.
- Tap Devices
- Now, Tap on the Ring Device you want to reconnect to wifi
- Select “Device Health”
- Select “Reconnect to Wifi”
- If you want to change the Wifi network choose “Change Wifi Network”
When Ring stick up cam not turning on
Maybe your ring stick up camera is not coming on, here are the troubleshooting steps you should carry out.
- Switch to another power outlet, probably the current one is faulty
- Next, Try unplugging the power source from the back of the unit and then plug it back in.
- Next, try holding down the setup button for 20 seconds
If the Ring stick up camera isn’t turning on, then you should contact support.
When Ring stick up cam not connecting to wifi
That time you’re Ring stick cam isn’t connecting to your wifi, try setting it up inside. Once you can get a successful setup, now, take it outside.
Tips on how to set up the ring stick up the camera from someone?
Assuming you have just gotten a Ring security cam device from a friend or you bought a used one from someone, the person ought to have removed the device from his/her ring app, if the person didn’t do that, you will not be able to set it up.
Now you can share this webpage with the person, here’s how he/she will do that.
- First of all launch the Ring app (Andriod, iOS)
- And tap on the gear icon for Security Camera
- Now tap on Device Setting > General Setting > Remove this Device
When you are done with that, you will be able to set it up.
The Conclusion
So the fact that you’ve figured out How to reset ring stick up camera, and other related versions of the ring stick camera, troubleshooting your security cam should come easy, however, you should reset your device, only after trying other troubleshooting steps.